top of page
  • Peter

Glen Forrest - driveway - asphalt resurface

The two photos below show an existing well worn crossover and driveway with a couple of tree root raised sections.

The photos below show the completed resurfaced driveway and crossover.

The area was swept clean, potholes prefilled and compacted and the tree root raised sections levelled and compacted.

The area was then tacked with a bitumen emulsion and resurfaced with a minimum 25mm thick layer of 7mm granite black hotmix/asphalt.

After these photos were taken the area was lightly covered with sand to prevent scuffing while freshly laid and to allow for immediate traffic use.

10 views0 comments


Post: Blog2_Post
bottom of page